Read my latest article: 8 things I look for in a Ruby on Rails app (posted Thu, 06 Jul 2017 16:59:00 GMT)

Installing Ruby on Rails and PostgreSQL on OS X, Third Edition

Posted by Tue, 22 Jan 2008 16:55:00 GMT

3 comments Latest by Scof Fri, 05 Feb 2010 17:03:22 GMT

Over the past few years, I’ve helped you walk through the process of getting Ruby on Rails up and running on Mac OS X. The last version has been getting a lot of comments related to issues with the new Apple Leopard, so I’m going this post will expand on previous installation guides with what’s working for me as of January 2008.

The following guide is how our development team at Planet Argon prefers to setup our development workstations

WARNING: This post contains some outdated instructions. Please read Installing Ruby on Rails, Passenger, PostgreSQL, MySQL, Oh My Zsh on Snow Leopard, Fourth Edition , which is focused on Installing Ruby on Rails on Snow Leopard.

During this installation, we’ll have what we feel is the optimal development stack for building Ruby on Rails applications with our favorite database server, PostgreSQL.

Ready? Let’s get started…

Phase One

During this initial phase, we’re going to install the underlying dependencies that we’ll be building off of.

XCode 3.0

The first thing that you’ll need to install to get far with this process is XCode tools, which is distributed by Apple. You can find this on the DVD that your Leopard installer is on. You can also download the latest version from Apple’s developer site.

The current version (3.0) is 1.1 GB.. so the download time will vary depending on your connection speed. I would encourage you to drink some tea and/or read a book

Once you finish the installation, you can move forward. The rest of these installation will not work until XCode is installed. :-)

MacPorts

In this next step, we’ll install MacPorts (formerly known as DarwinPorts). The MacPorts web site describes itself as, “an open-source community initiative to design an easy-to-use system for compiling, installing, and upgrading either command-line, X11 or Aqua based open-source software on the Mac OS X operating system.”

This tool is about to become one of the most important tools on your operating system as it’ll be used time and time again to maintain your libraries and many of the Unix tools that you’ll be using. If you’re from the Linux or BSD world, you are likely familiar with similar tools… such as: apt-get, port, and yum.

First, you’ll want to download MacPorts and install the “dmg” disk file for Leopard at the following link.

Once downloaded, you’ll want to run the installer and install it on your workstation.

Install MacPorts-1.6.0

Work you way through the installer until successfully installed.

Install MacPorts-1.6.0

Once this finishes, you can open up your favorite terminal application and run the following to test that it installed properly.

In my case, I’m now using Terminal.app.

Issue the command: /opt/local/bin/port version

_opt_local_bin_port version

If it responds with a version number like mine did in the screenshot above, we’re moving along nicely.

Environment Paths

When we install MacPorts, the command to install/update ports installed to /opt/local/bin. We had to provide the entire path as this isn’t currently showing up in the default $PATH on Leopard. Let’s quickly remedy this by modifying the file /etc/profile.

If you have Textmate installed, you can run the following from your terminal: mate /etc/profile

Add the following line to the bottom of /etc/profile.

export PATH=/opt/local/bin:/opt/local/sbin:$PATH
profile

You can use your favorite editor to update this file. Once you save it, you’ll want to restart your terminal application (or open a new tab) to create a new session. When your new terminal opens, run the following to verify that port is showing up in your $PATH.

which port

You should see /opt/local/bin/port show up as the result of this command.

which port

Great, let’s continue to move forward.

Hiding Apple’s Ruby, Gems, and Rails

Before we install Ruby from MacPorts, we’ll go ahead and hide Apple’s Ruby installations.


    :~ robbyrussell$ sudo su -
    Password:
    :~ root# mv /usr/bin/ruby /usr/bin/ruby.orig
    :~ root# mv /usr/bin/gem /usr/bin/gem.orig
    :~ root# mv /usr/bin/rails /usr/bin/rails.orig
    :~ root# logout    
hiding apples ruby

If you ever decide to remove MacPorts, you can just rename ruby.orig back to ruby and you’re back where you started… and the same for the others listed.

Phase Two

During this next phase, we’re going to install Ruby and Ruby on Rails.

Installing Ruby via MacPorts

Now that we have MacPorts up and running, we’re going to use it for the first time. We’ll start by using it to install Ruby and the Rubygems package.

$ sudo port install ruby rb-rubygems

Okay, this will take a little while. I’d suggest that you step out to get some fresh air.

How was it outside? What’s the weather like there today? It’s currently 2:30am PST so it’s dark and an 28F outside so I didn’t stay outside very long.

If you’re still waiting for it to install, perhaps you could watch the following video. I might encourage you to check out more of Jam, which was recommended a few years ago to me by James Adam at Canada on Rails.

Be warned… it’s a strange show, but I find strange things like this funny. :-)

If you prefer something a bit more lighthearted…

Okay… when Ruby finishes installing, you’ll want to test that you can run it.

$ ruby -v

Great, let’s move forward!

Installing Ruby on Rails via RubyGems

We’re now going to install the libraries that make up Ruby on Rails via RubyGems.

$ sudo gem install --include-dependencies rails

This will install the following gems.

  • rails-2.0.2
  • rake-0.8.1
  • activesupport-2.0.2
  • activerecord-2.0.2
  • actionpack-2.0.2
  • actionmailer-2.0.2
  • activeresource-2.0.2

Excellent, let’s move forward…

If you haven’t already purchased it, I recommend that you take a look at The Rails Way (Addison-Wesley Professional Ruby Series) by Obie Fernandez.

Installing Mongrel via RubyGems

Let’s now install Mongrel, which is an excellent Ruby-based web server for Ruby on Rails applications. We use it in development and production at Planet Argon and it’s also what we recommend to our hosting customers.

$ sudo gem install --include-dependencies mongrel mongrel_cluster
  • Note: Be sure to select the proper platform for mongrel. (hint: OS X is NOT mswin32)
My terminal output:

Select which gem to install for your platform (i686-darwin9.1.0)
 1. mongrel 1.1.3 (java)
 2. mongrel 1.1.3 (i386-mswin32)
 3. mongrel 1.1.3 (ruby)
 4. mongrel 1.1.2 (ruby)
 5. mongrel 1.1.2 (mswin32)
 6. mongrel 1.1.2 (java)
 7. Skip this gem
 8. Cancel installation
> 3
Select which gem to install for your platform (i686-darwin9.1.0)
 1. fastthread 1.0.1 (mswin32)
 2. fastthread 1.0.1 (ruby)
 3. Skip this gem
 4. Cancel installation
> 2
Building native extensions.  This could take a while...
Building native extensions.  This could take a while...
Successfully installed mongrel-1.1.3
Successfully installed gem_plugin-0.2.3
Successfully installed daemons-1.0.9
Successfully installed fastthread-1.0.1
Successfully installed cgi_multipart_eof_fix-2.5.0
Installing ri documentation for mongrel-1.1.3...
Installing ri documentation for gem_plugin-0.2.3...
Installing ri documentation for daemons-1.0.9...
Installing ri documentation for fastthread-1.0.1...

No definition for dummy_dump

No definition for dummy_dump

No definition for rb_queue_marshal_load

No definition for rb_queue_marshal_dump
Installing ri documentation for cgi_multipart_eof_fix-2.5.0...
Installing RDoc documentation for mongrel-1.1.3...
Installing RDoc documentation for gem_plugin-0.2.3...
Installing RDoc documentation for daemons-1.0.9...
Installing RDoc documentation for fastthread-1.0.1...

No definition for dummy_dump

No definition for dummy_dump

No definition for rb_queue_marshal_load

No definition for rb_queue_marshal_dump
Installing RDoc documentation for cgi_multipart_eof_fix-2.5.0...
Successfully installed mongrel_cluster-1.0.5

Great, you have almost all of the essentials.. except a database.

Phase Three

In this phase, we’re going to get our database server, PostgreSQL, installed and the libraries that Ruby needs to communicate with it.

Installing PosgreSQL with MacPorts

At Planet Argon, we design and develop our applications on top of PostgreSQL. I’ve been advocating the adoption of this awesome open source database in the Rails community for quite some time now.

The current version available of PostgreSQL via MacPorts is 8.3, which is what we’ll now install with the port command.

$ sudo port install postgresql83 postgresql83-server

This will download and install the necessary libraries to run PostgreSQL server and the client utilities.

Configuring PostgreSQL

When PostgreSQL is finished installing, it’ll tell you to run the following commands to create a new database instance.


 sudo mkdir -p /opt/local/var/db/postgresql83/defaultdb
 sudo chown postgres:postgres /opt/local/var/db/postgresql83/defaultdb
 sudo su postgres -c '/opt/local/lib/postgresql83/bin/initdb -D /opt/local/var/db/postgresql83/defaultdb'

Adding PostgreSQL to launchd

If you’d like to have PostgreSQL automatically startup after a system restart, you can load it into launchd, which comes with OS X. By running the following command, PostgreSQL will startup automatically on the next system restart.

sudo launchctl load -w /Library/LaunchDaemons/org.macports.postgresql83-server.plist

Adding PostgreSQL to your $PATH

For some reason, the MacPort for PostgreSQL doesn’t get the programs in your path automatically, so we’ll it now.

mate /etc/profile

Modify the PATH that we changed earlier to include /opt/local/lib/postgresql83/bin@.

export PATH=/opt/local/bin:/opt/local/sbin:/opt/local/lib/postgresql83/bin:$PATH

Save the file and then open a new terminal. To test this, you should get the following output when you run which psql.


  $ which psql
  /opt/local/lib/postgresql83/bin/psql    

Creating a new PostgreSQL user

When I’m working on Rails applications in my development environment, I really don’t want to have to specify a username and password in every config/database.yml file for each of our ongoing client projects. When PostgreSQL was installed, it created a superuser named postgres, which is great, but I’d like one that matches my system username, so that I’m not prompted at all for a username or password to connect to PostgreSQL.

To do this, we’ll use the createuser command, which comes with PostgreSQL. As you can see, I’m creating a new user with superuser privileges (and will hopefully be the last time I have to do a -U postgres).


  $ createuser --superuser robbyrussell -U postgres
  CREATE ROLE    
Let’s take a quick moment to test this out.

  # create a new database
  $ createdb my_test_db
  CREATE DATABASE

  # drop the database
  $ dropdb my_test_db
  DROP DATABASE

Great, everything looks good here.

We now have a running installation of PostgreSQL with a new user account. All we need to do now is install the appropriate RubyGem to allow our Ruby applications to connect to it.

Installing PostgreSQL Libraries for Ruby

You can install postgres gem by running the following command.

$  sudo gem install --include-dependencies postgres

Great. We’ve now built a professional development environment for working with Ruby on Rails. Can you feel the excitement? :-)

Closing Thoughts

Like the previous versions, I hope that a few people find this useful. I didn’t have to make a lot of changes from the second edition, but there were enough to warrant a new post. I’ve been setting up my workstation like this for about three years now and I’m looking forward to seeing how a fresh install on Leopard works out for me.

If you have any problems, feel free to ask a question in the comments below.

Get help with your Rails project

comments powered by Disqus
Comments

Leave a response

  1. Avatar
    Lance Carlson Tue, 19 Jan 2010 06:16:13 GMT

    Homebrew is probably the easiest way to install it now.. yes?

  2. Avatar
    Scof Fri, 05 Feb 2010 17:01:20 GMT

    Hi,

    I installed Ruby, Macports, Postgresql, etc. everything as according to your tutorial. I have a separate account that says PostgreSQL83\Server. Now I want to uninstall everything but dont know how. All the tutorials I have seen either to you by default installer (which I didnt use) and i can’t get to uninstall it even through http://www.postgresqlformac.com/news/archived_news/uninstall_835.html as the folders in my case don’t exist at all. Please help. I don’t have much experience. Thank you. :)

  3. Avatar
    Scof Fri, 05 Feb 2010 17:03:22 GMT

    I also tried:

    sudo port uninstall postgresql83 postgresql83-serverPassword: Error: port uninstall failed: Registry error: postgresql83 not registered as installed.

    but get the above error

    But its odd since I did install it exactly as mentioned above through macports. :s